Frame Fittings

More info

Tent Frame Fittings


Frame Fittings are used in the structure, or framing, of tents and canopies. Our fittings are made for the traditional West Coast style frame tents. They are steel pipe with an outside dimension of 1-5/8” and inside pipe dimension of 1-3/8”. We have several frame pieces available.

Large professional party tents and canopies must be anchored to hold them down. For frame and pole tents to remain upright, they must be properly and securely anchored to the ground. There is always a chance that the loads imposed on a tent stake will exceed its ability to resist that load. When installing a tent always plan for high winds, heavy rain, poor soil conditions and adverse weather conditions.

The roof is tensioned over the poles and attached to tent straps at designated spots around the edges. The tent ratchet straps are anchored to the ground using tent stakes around the perimeter of the tent.

We can make your tent straps any length and with any hardware. When it comes to setting up a tent, it is always important to have the right equipment.  Ratchets, rings, hooks, and other hardware need to be sturdy and reliable.  We offer a full line of hardware for almost any tent.  We can custom make any size ratchet straps to the length you need them.

WARNING: Do not ever exceed the working load limit of any strap or hardware at anytime. Caution should be used at all times when tightening and releasing ratchets.